If you’re looking to Sell Fluke OMNI-LIA101S Permanent Adapter Set

The world’s most accurate Permanent Link Test Solution
The DSP and OMNI Universal Permanent Link Interface Adapters combine superior performance and repeatability while eliminating false failures and delivering more passes. The DSP and OMNI Universal Permanent Link Adapter Kits move the baseline accuracy of Fluke Networks’ DSP-4000 Series and OMNIScanner® Series to the very end of the test adapter, delivering exceptional test results and standards compliance for field testing of twisted-pair cabling installations.

New Universal Permanent Link Interface Adapter offers:

• A Cat 6 certification solution that delivers the highest performance available to deliver the maximum number of PASS results.
• Installation time savings by eliminating costly false FAIL results due to field handling of twisted-pair tester patch cables.
• Superior Return Loss accuracy and repeatability that far exceeds new TIA/EIA-568-B standard.
• Field-tough, proprietary design that survives field use to maintain accuracy and stability.
• Compliance with TIA/EIA-568-B to win more jobs.

Do you know the weakest link between you and a PASS?
Unknown to most installers, the tester’s adapter interface cable may be the weakest link when testing. Conventional adapter cords, even high-quality adapter cables with shielded pairs, may cause many false failures in the field. Coiling, uncoiling, and storing under rough field conditions cause slow, invisible degradation with time and contribute to Return Loss, which is often the cause of a FAIL. False failures add unnecessary hours of troubleshooting and repeat testing. For less than the cost of one failed link, Fluke Networks’ Universal Permanent Link Interface Adapter boosts your PASS results time and again.

New, proprietary technology ensures accuracy
The new Universal Permanent Link Interface Adapter design delivers superior accuracy and stability required for measuring Return Loss, while increasing the accuracy of all other measured test parameters. Moving the baseline accuracy of the DSP-4000 Series Digital CableAnalyzer™ and the OMNIScanner® Series to the end of the Universal Permanent Link Interface Adapter, it eliminates the effects contributing to FAIL results associated with any twisted-pair tester adapter. Your PASS is a real PASS. If you FAIL, you can be sure that it is not your tester or the adapter.

Buying, Selling, Trading Fluke OMNI-LIA101S

Comply with standards to win more jobs
Don’t lose out on jobs that require your installations to be TIA/EIA-568-B compliant. Basic Link is out, Permanent Link is in . You can now test the Permanent Link as defined by TIA/EIA-568-B with the highest level of accuracy, repeatability and confidence.

Modularity at the end of the adapter
New Personality Modules at the end of the Universal Permanent Link Interface Adapter ensure that the connection between the adapter and the link-under-test yields optimum NEXT performance, and more PASSes. These modules feature a compact, lightweight design that allows replacement without buying a complete manufacturerspecific adapter.

Includes:

• (2) Fluke Networks OMNI-LIA101S Universal Permanent Link Adapters
• (2) Fluke Networks PM01 Personality Modules
• User Manual On CD-ROM

If you’re selling your Fluke OMNI-LIA101S please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Fiber Fluke Networks SM & MM Fiber Modules

Features:

• Certify Singlemode fiber with Fluke Microtest SM OMNIFiber Adapters.
• Test two fibers at two wavelengths in a single automated operation.
• Measure fiber length, propagation delay and optical loss.
• Provide clear PASS or FAIL indication with automated results analysis.
• Enable bi-directional testing without swapping main and remote units.
• Feature standards and fiber cable libraries for easy set-up.
• Incorporate interchangeable connector adapters for simple network connection.
• Communicate with LinkWareâ„¢ Cable Test Management Software.
• Quickly snap onto any OMNIScanner® series cable analyzer.
• Are ruggedly built for demanding field use.
• Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.
• Multimode Fiber: Length, Propagation Delay, Loss (850nm & 1300nm)

The right adapter for the job
Your network may contain different fiber types: multimode or singlemode. The way to accurately test and certify your network is with an adapter designed for the job. Fluke Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.

Buying, Selling, Trading OMNI Fiber

Fast and easy testing
Using an OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures fiber length and optical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL indication. Test more fibers in less time with OMNIFiber. OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular
connector styles.

OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.

• Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters

If you’re selling your OMNI Fiber please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Fiber Fluke Networks SM Fiber Optic Modules

Features:

• Certify Singlemode fiber with Fluke Microtest SM OMNIFiber Adapters.
• Test two fibers at two wavelengths in a single automated operation.
• Measure fiber length, propagation delay and optical loss.
• Provide clear PASS or FAIL indication with automated results analysis.
• Enable bi-directional testing without swapping main and remote units.
• Feature standards and fiber cable libraries for easy set-up.
• Incorporate interchangeable connector adapters for simple network connection.
• Communicate with LinkWare™ Cable Test Management Software.
• Quickly snap onto any OMNIScanner® series cable analyzer.
• Are ruggedly built for demanding field use.
• Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.

Buying, Selling, Trading OMNI Fiber

The right adapter for the job
Your network may contain different fiber types: multimode or singlemode. The way to accurately test and certify your network is with an adapter designed for the job. Fluke Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.

Fast and easy testing
Using an OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures fiber length and optical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL indication. Test more fibers in less time with OMNIFiber. OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular
connector styles.

If you’re selling your OMNI Fiber please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Fiber Fluke Microtest MM Fiber Module Set

OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.

• Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters
  • Easily manage and document copper and fiber links with LinkWare software

Buying, Selling, Trading OMNI Fiber

Test Functions:

• Multimode Fiber: Length, Propagation Delay, Loss (850nm & 1300nm)

If you’re selling your OMNI Fiber please fill out form on the right hand side of page.