If you’re looking to Sell Ideal LANTEK 2-500 Cat6 Cat6a LAN Cable Certfier

Features

• High speed testing saves time and money
• Most internal memory available – store over 1700 Category 6/ISO E tests with graphs
• Patented testing method – eliminate expensive permanent link adapters and test with patch cords for most installation
• Extraordinary fast fiber testing with FiberTEK® FDX – the first dual wavelength, bidirectional fiber certification tool
• Large, ultra-bright display – 4.3 in. wide screen display with white LED backlighting provides easy viewing of high-frequency data plots
• 350 MHz & 500 MHz models are fully upgradable to 1000 MHz
• Smart lithium-ion battery technology – 18 hour battery life with self calibrating “fuel gauge” for accurate capacity readings

LanTEK II offers the best speed, performance and price available today. Nine second Cat 5E and 14 second Cat 6 tests with full performance data plus 10 Gigabit Alien Crosstalk testing that’s more than 4x faster than other systems making LanTEK II the ultimate copper certification platform. The patented universal adapter system lets you certify most cabling with off-the-shelf patch cords saving time and money by eliminating the need for proprietary permanent link adapters.

The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fiber certification available. That’s more than 3x faster than existing testers. Three models provide the needed performance without the added expense; choose from 350 MHz/Cat 6, 500 MHz/Cat 6A or 1000 MHz/Cat7A all with accuracy independently verified by ETL.

LanTEK II also offers ultimate versatility with options for certification of TERA, GG45 and EC7 category 7/7A systems, plus M12 industrial Ethernet and coaxial test adapters.

Universal Link Testing
The patented testing process eliminates the need for costly permanent link adapters. By using universal test adapters for Category 5E through 6A certification, patch cords are typically the only item that needs to be replaced when worn or damaged. This eliminates the wait and expense of proprietary adapters meaning more time is spent testing and less time searching for replacement parts.

Channel and Permanent Link Testing with One Adapter
Only LanTEK allows permanent link and channel certification without changing adapters. The patented DualMODE™ function allows cabling to be certified to two different standards with one press of the Autotest button; half the time it would take with any other certifier.

Certify cabling to both Category 6 permanent link and Category 6 channel link standards at the same time, satisfying requirements from cabling manufacturers and end users without costing any more time in the field. Or certify cabling to existing current standards and proposed future standards which eliminates retesting at a later date.

Buying, Selling, Trading Ideal LANTEK 2-500

Fast Test Times
Category 5E certification in 11 seconds, Category 6 in 14 seconds, and Category 6A in only 16 seconds with graphs! Plus enjoy fiber certification that’s 3x faster and 10 gigabit alien crosstalk certification that’s 4x faster than the competition.

Most Memory Capacity
LanTEK II has 7x the storage capacity as competitive certifiers. Save an astonishing 1700 Category 6 results with graphs. If the memory fills, simply off-load the data to a USB flash drive for portability and archiving.

Cut the Power Cord
The new smart lithium battery technology provides an amazing 18 hours of use in the field. The revolutionary battery technology has two charging modes that offer the best flexibility available. Slow charge the battery overnight while it is inside the LanTEK II, or remove the battery and plug in to its dedicated charging port for a quick five hour charge. Plus, the battery’s internal fuel gauge automatically selfadjusts every time the pack is completely discharged and recharged, providing accurate charge readings over the life of the battery pack.

Three Models to Suit Any Need
LanTEK II is offered in three models: 350, 500 and 1000. The LanTEK II-350 offers 350MHz of frequency sweep to certify Category 6 cabling and below. LanTEK II-500 sweeps to 500MHz, and is the only certifier designed specifically for Category 6A cabling. LanTEK II-1000 is the world’s fastest certifier with a full 1GHz of certification bandwidth to go well beyond Category 7/ISO Class F (600MHz), all the way to ISO Class FA (1000MHz) standard to support shared sheath applications such as CATV, Ethernet and voice in the same cable.

Maximum Reporting Power
The new IDEAL DataCENTER (IDC) software puts the power in the fingertips of the user. The main test grid display can be customized to display and sort by virtually any test parameter allowing for quick identification of tests that are below desired performance margins. Quickly scan through plot data by choosing a plot type and scrolling through the test list to instantly refresh the plot for each test. This makes visually scanning through reports and searching for anomalies a breeze. IDC offers many reporting options such as detailed, brief, and single line reports, plus export data in XML, CSV and PDF formats. Plus the unique ability to customized the plots by inverting the scales, toggling linear or log frequencies and even adjusting colors makes IDC the most user friendly and powerful cable reporting software ever.

If you’re selling your Ideal LANTEK 2-500 please fill out form on the right hand side of page.

If you’re looking to Sell Ideal SignalTEK II FO Cable & Network Qualifier

IDEAL SignalTEK II Cable & Network Qualifier
Handheld cable and network qualifier designed to confirm correct installation of copper & fiber cabling capable of supporting voice, video, data and CCTV applications over 10/100 Megabit or Gigabit Ethernet.

A handheld tester for voice, video, data and CCTV applications over copper
SignalTEK® II provides an alternative to a cable certifier for applications such as business or residential installations which do not require certification to conventional EIA/TIA or ISO/IEC standards

Full Gigabit bi-directional load testing
Test cabling and live networks with full-rate Ethernet traffic to 1Gbps for true performance Qualification

Additional Ethernet troubleshooting capabilities
Maximize Return on Investment with the added ability to identify Ethernet, Power over Ethernet (PoE) and PoE+ issues, in addition to verifying Ethernet connectivity

Load test through hubs and switches
Save money by measuring available network speed without needing to purchase a separate transmission tester

Suitable for both copper & fiber
Eliminate the need to purchase and carry multiple different testers by using one device to conduct active and passive testing across both copper & fiber networks

Wiremapping by pin as well as pair
Save time on the job and locate wiremap faults more quickly and accurately by testing via both pin and pair, detecting split pairs and identifying the distance to fault

Reporting of test results
Simplify customer reporting and create accurate documentation on jobs undertaken using SignalTEK® II to generate and store test results in standards compliant XML format. Additionally, view and export results to enable report printing

Working in environments where cable and network qualification is necessary to confirm correct installation, SignalTEK® II is a cost-effective way to test network links to performance standards including IEEE 802.3ab. SignalTEK® II is designed to test copper cabling capable of supporting voice, video, data and CCTV applications over 10/100 Megabit or Gigabit Ethernet.

With multiple network troubleshooting features including wiremap by pin with distance to fault, cable tracing and verifying Ethernet connectivity, SignalTEK® II is a highly versatile and cost effective handheld tool.

The rubber moulded housing is perfect for the cabling installer whose workplace requires a rugged and robust tool. When working in poorly lit areas the bright, backlit color screen displays test results clearly.

User-exchangeable RJ45 inserts and intuitive screen icons ensure the installer maximises productivity in the working day. Completed jobs can be reported upon, using the internal memory and USB interface to export results.

Buying, Selling, Trading Ideal SignalTEK II FO

Capable of multiple performance testing, SignalTEK® II enables the IT or network administrator to operate, with confidence in the accuracy of the results, both rapidly and with minimal user training.

SignalTEK® II performs active network testing through hubs and switches all the way to the server.

Not only does it detect and run load testing on PoE and PoE+, SignalTEK® II is specifically capable of running full bi-directional Gigabit tests, providing time savings and assurance of network performance.

Incorporating IPv6 compatibility, SignalTEK® II provides a future-proof investment for all who need a cable qualifier.

Providing multiple benefits to all users, SignalTEK® II is a handheld cable and network qualifier designed to confirm correct installation of copper & fiber cabling capable of supporting voice, video, data and CCTV applications over 10/100 Megabit or Gigabit Ethernet.

Applications:

• Qualify new cabling installations
  • to generate end-user confidence in the infrastructure to support desired applications such as Voice over IP (VoIP)
• Test that existing cabling
  • can support Gigabit Ethernet
• Troubleshoot network issues
  • by performing active network testing through switches all the way to the server
• Run transmission tests
  • Verify that existing network infrastructure can handle proposed upgrades & additions
• Document network connectivity
  • and generate detailed reports proving job completion to initiate end-customer payment

   

If you’re selling your Ideal SignalTEK II FO please fill out form on the right hand side of page.

If you’re looking to Sell Ideal FiberTEK SM FDX Laser Modules 4 LanTek 2

IDEAL FiberTEK FDX SingleMode Fiber Modules

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Buying, Selling, Trading Ideal FiberTEK

Simplified Testing

Unlike other fiber certification add-ons that require up to four separate testing steps to test each fiber at both wavelengths and in both directions, FiberTEK FDX can accomplish this task in one easy step. FiberTEK FDX revolutionizes the whole fiber certification process by utilizing a sophisticated full duplex optical module that lets each fiber be certified in one simple step with no reversing of patch cords or swapping of optical modules. Four attenuation measurements plus length in one press of the Autotest button. The simplest way to certify fiber.

If you’re selling your Ideal FiberTEK please fill out form on the right hand side of page.

If you’re looking to Sell Ideal FiberTEK MM FDX VCSEL Laser Modules LanTek 2

IDEAL 0012-00-0676 FiberTEK FDX Multimode (850/1300nm)  with VCSEL/laser light sources for laser optimized fiber, 850nm VCSEL, 1300nm FP laser

VSCEL/laser sources have a high dynamic range for certification of links greater than 2kM in length.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.
Buying, Selling, Trading Ideal FiberTEK

Simplified Testing

Unlike other fiber certification add-ons that require up to four separate testing steps to test each fiber at both wavelengths and in both directions, FiberTEK FDX can accomplish this task in one easy step. FiberTEK FDX revolutionizes the whole fiber certification process by utilizing a sophisticated full duplex optical module that lets each fiber be certified in one simple step with no reversing of patch cords or swapping of optical modules. Four attenuation measurements plus length in one press of the Autotest button. The simplest way to certify fiber.

If you’re selling your Ideal FiberTEK please fill out form on the right hand side of page.

If you’re looking to Sell Ideal SignalTek-FO Remote Handset Unit

This unit requires the SignalTek FO Tester in order to work
Product Overview:
The SIGNALTEK-FO is the first and only tester to qualify both copper and fiber-optic cabling to IEEE 802.3 standards. All in one unit that’s less than the price of an optical test set.

With its compact design and soft over-molded sides, the SIGNALTEK-FO fits comfortably in your hands. The easy-to-navigate user interface enables multimedia Gigabit qualification with multimode and single mode capability. You can also perform Bit Error Rate testing and decibel (dB) loss measurements of optical links. Plus, storing and printing qualification reports for copper and fiber jobs are simple using internal memory or USB thumb drives.
SIGNALTEK-FO Capabilities beyond the typical Qualifier

SIGNALTEK-FO offers all of the existing capabilities of the standard SIGNALTEK Qualifier such as Gigabit Ethernet Qualification, test storage and reporting, and active link testing and adds the powerful capability of fiber optic Qualification. Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance.

SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

Buying, Selling, Trading Ideal SignalTek-FO

Features:
* Multimode and single mode capability
* Available in 850nm and 1300nm wavelength configurations
* Measure cable attenuation with a dynamic range of up to 20dB
* Guarantee link operation at 1Gbps within IEEE error tolerances

In addition to cable performance qualification, SIGNALTEK can be configured to run for several minutes or hours at a time. While stress testing critical network links, SIGNALTEK transmits hundreds of Gigabits of information across the network while looking for dropped packets. This monitoring mode allows SIGNALTEK to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation of Gigabit Ethernet technology, IDEAL’s innovation brings the best performance to this new class of affordable testers.

Specifications:

Ports/Connections
* USB A/B, DC power input
* Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections
* Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet

Length Measurement
* RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460ft
* SFP Port: No length measurement of fiber optic cables

Bert Error Rate Measurements
* Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard
* Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard.

Battery Life
* Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest)
* Fiber Testing: Recommend use of AC adapters when testing fiber

If you’re selling your Ideal SignalTek-FO please fill out form on the right hand side of page.

If you’re looking to Sell Ideal FiberTEK SM MM FDX Laser Modules 4 LanTek 2

FiberTEK FDX Multimode (850/1300nm)  with VCSEL/laser light sources for laser optimized fiber, 850nm VCSEL, 1300nm FP laser

VSCEL/laser sources have a high dynamic range for certification of links greater than 2kM in length.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Buying, Selling, Trading Ideal FiberTEK

Simplified Testing

Unlike other fiber certification add-ons that require up to four separate testing steps to test each fiber at both wavelengths and in both directions, FiberTEK FDX can accomplish this task in one easy step. FiberTEK FDX revolutionizes the whole fiber certification process by utilizing a sophisticated full duplex optical module that lets each fiber be certified in one simple step with no reversing of patch cords or swapping of optical modules. Four attenuation measurements plus length in one press of the Autotest button. The simplest way to certify fiber.

If you’re selling your Ideal FiberTEK please fill out form on the right hand side of page.

If you’re looking to Sell Ideal SignalTek Gigabit Ethernet Cable Tester

SIGNALTEK is a unique cabling tester that offers the user the ability to test the performance of a wide range of installed cable system characteristics. With SIGNALTEK, the user can verify network performance, troubleshoot connectivity problems, and view network speeds to determine if the installed cable provides the necessary performance to support desired applications.

SIGNALTEK uses the IEEE 802.3ab (Gigabit Ethernet) standard as a reference for cable performance testing. Rather than a traditional certification test where frequency-based parameters such as Near End Crosstalk (NEXT) and return loss are measured, performance or qualification testing, as it is sometimes called, is a Bit Error Rate Test (BERT). Data packets are sent down the cable to the remote handset then re-transmitted back to the display handset where the number of lost or errored packets is counted. The results are displayed for the user to get an instant view of the cable’s performance. A cable performance test is marked as a “pass” or “fail” based on the IEEE 802.3ab parameters which specify the number of error packets allowed in a given test time.

FEATURES:

• SIGNALTEK is easy to use. It offers any installer the ability to perform cable performance tests and rapidly locate connectivity issues.
• SIGNALTEK will generate performance reports that can be viewed and printed with any web browser. No special software is necessary making it easy to view, print, and share test data.
• SIGNALTEK can test cable links in one of three conditions: Terminated with the SIGNALTEK remote device; Active LAN Links that terminate to a hub, switch, or PC; or to a singleended link that is not terminated to a device at the opposite end.
• SIGNALTEK uses two test handsets that allow full-duplex performance testing of cables at Ethernet speeds of up to 1 Gigabit per second (1Gbps).

Buying, Selling, Trading Ideal SignalTek

Cable Types

SIGNALTEK is compatible with a variety of cable types and configurations. Cable Performance tests can be run on any type of twisted pair cable that supports Ethernet. Since 10/100 Ethernet requires a minimum of two pairs to operate, cables with only one pair cannot be tested for Ethernet performance, this includes coax cable types.

SIGNALTEK Test Functions

SIGNALTEK can perform a variety of both passive and active tests on communications cable. The passive tests are those where SIGNALTEK is connected to both ends of the cabling link. Active tests are those in which one end of the link is connected to an active network device such as a PC, switch, router or other device and the opposite end of the link is connected to the SIGNALTEK handset.

Wire map – Displays the physical paring of the cable. Also displays the length of each pair, the condition of the termination (terminated, open, shorted) and the delay skew when a Gigabit link is established.

Link Establishment – Displays the fastest Ethernet speed that SIGNALTEK was able to establish on the link. When the link is terminated with a SIGNALTEK remote handset, Link Establishment will display 10, 100 or 1000 Mbps depending on the quality of the cabling. When connected to an active LAN link, Link Establishment will display the fastest speed that was negotiated with the remote switch/hub/NIC.

Cable Performance – Displays the BERT data results for links tested between the SIGNALTEK display and remote handsets. Information displayed includes: packet size, total number of packets transmitted, number of packets received, number of packets with errors, and a percentage bar graph of each.

VoIP (Voice over IP) Performance – Similar to the Cable Performance test except that the packets are smaller to accurately simulate VoIP transmissions.

Web Performance – Performance test that simulates the size and payload of typical internet packets.

IP Video Performance – Performance test that simulates the size and payload of typical IP video applications.
Note: IP Video is not the same as CATV broadband video. This test is useful to test twisted pair links that will be used to support IP cameras for security applications.

DHCP – When connected to active Ethernet networks the display handset will locate a DHCP (Dynamic Host Configuration Protocol) server and request an IP address from the server. The data displayed is: SIGNALTEK’s IP address, IP address of the DHCP server, the IP address of the network router, IP subnet, and the name of the internet service provider (ISP).

Ping – Displays the results of the ping test when SIGNALTEK is connected to an active Ethernet network. The user can choose the target IP address to ping, the packet size, the number of packets to send,

If you’re selling your Ideal SignalTek please fill out form on the right hand side of page.

If you’re looking to Sell FLIR 572 Precision Infrared IR Thermometer

Features

• Best price/performance options – models ranging from 350 MHz to 1000 MHz for Category 6/ISO E through Category 7A/ISO FA certification
• High speed testing saves time and money
• Most internal memory available – store over 1700 Category 6/ISO E tests with graphs
• Patented testing method – eliminate expensive permanent link adapters and test with patch cords for most installation
• Extraordinary fast fiber testing with FiberTEK® FDX – the first dual wavelength, bidirectional fiber certification tool
• Large, ultra-bright display – 4.3 in. wide screen display with white LED backlighting provides easy viewing of high-frequency data plots
• 350 MHz & 500 MHz models are fully upgradable to 1000 MHz
• Smart lithium-ion battery technology – 18 hour battery life with self calibrating “fuel gauge” for accurate capacity readings

LanTEK II offers the best speed, performance and price available today. Nine second Cat 5E and 14 second Cat 6 tests with full performance data plus 10 Gigabit Alien Crosstalk testing that’s more than 4x faster than other systems making LanTEK II the ultimate copper certification platform. The patented universal adapter system lets you certify most cabling with off-the-shelf patch cords saving time and money by eliminating the need for proprietary permanent link adapters.

The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fiber certification available. That’s more than 3x faster than existing testers. Three models provide the needed performance without the added expense; choose from 350 MHz/Cat 6, 500 MHz/Cat 6A or 1000 MHz/Cat7A all with accuracy independently verified by ETL.

LanTEK II also offers ultimate versatility with options for certification of TERA, GG45 and EC7 category 7/7A systems, plus M12 industrial Ethernet and coaxial test adapters.

Universal Link Testing
The patented testing process eliminates the need for costly permanent link adapters. By using universal test adapters for Category 5E through 6A certification, patch cords are typically the only item that needs to be replaced when worn or damaged. This eliminates the wait and expense of proprietary adapters meaning more time is spent testing and less time searching for replacement parts.

Channel and Permanent Link Testing with One Adapter
Only LanTEK allows permanent link and channel certification without changing adapters. The patented DualMODE™ function allows cabling to be certified to two different standards with one press of the Autotest button; half the time it would take with any other certifier.

Certify cabling to both Category 6 permanent link and Category 6 channel link standards at the same time, satisfying requirements from cabling manufacturers and end users without costing any more time in the field. Or certify cabling to existing current standards and proposed future standards which eliminates retesting at a later date.

Fast Test Times
Category 5E certification in 11 seconds, Category 6 in 14 seconds, and Category 6A in only 16 seconds with graphs! Plus enjoy fiber certification that’s 3x faster and 10 gigabit alien crosstalk certification that’s 4x faster than the competition.

Most Memory Capacity
LanTEK II has 7x the storage capacity as competitive certifiers. Save an astonishing 1700 Category 6 results with graphs. If the memory fills, simply off-load the data to a USB flash drive for portability and archiving.

Cut the Power Cord
The new smart lithium battery technology provides an amazing 18 hours of use in the field. The revolutionary battery technology has two charging modes that offer the best flexibility available. Slow charge the battery overnight while it is inside the LanTEK II, or remove the battery and plug in to its dedicated charging port for a quick five hour charge. Plus, the battery’s internal fuel gauge automatically selfadjusts every time the pack is completely discharged and recharged, providing accurate charge readings over the life of the battery pack.

Three Models to Suit Any Need
LanTEK II is offered in three models: 350, 500 and 1000. The LanTEK II-350 offers 350MHz of frequency sweep to certify Category 6 cabling and below. LanTEK II-500 sweeps to 500MHz, and is the only certifier designed specifically for Category 6A cabling. LanTEK II-1000 is the world’s fastest certifier with a full 1GHz of certification bandwidth to go well beyond Category 7/ISO Class F (600MHz), all the way to ISO Class FA (1000MHz) standard to support shared sheath applications such as CATV, Ethernet and voice in the same cable.

Maximum Reporting Power
The new IDEAL DataCENTER (IDC) software puts the power in the fingertips of the user. The main test grid display can be customized to display and sort by virtually any test parameter allowing for quick identification of tests that are below desired performance margins. Quickly scan through plot data by choosing a plot type and scrolling through the test list to instantly refresh the plot for each test. This makes visually scanning through reports and searching for anomalies a breeze. IDC offers many reporting options such as detailed, brief, and single line reports, plus export data in XML, CSV and PDF formats. Plus the unique ability to customized the plots by inverting the scales, toggling linear or log frequencies and even adjusting colors makes IDC the most user friendly and powerful cable reporting software ever.

Buying, Selling, Trading FLIR 572

FiberTEK FDX Multimode (850/1300nm)  with VCSEL/laser light sources for laser optimized fiber, 850nm VCSEL, 1300nm FP laser

VSCEL/laser sources have a high dynamic range for certification of links greater than 2kM in length.

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Simplified Testing

Unlike other fiber certification add-ons that require up to four separate testing steps to test each fiber at both wavelengths and in both directions, FiberTEK FDX can accomplish this task in one easy step. FiberTEK FDX revolutionizes the whole fiber certification process by utilizing a sophisticated full duplex optical module that lets each fiber be certified in one simple step with no reversing of patch cords or swapping of optical modules. Four attenuation measurements plus length in one press of the Autotest button. The simplest way to certify fiber.

If you’re selling your Ideal LANTEK 2 please fill out form on the right hand side of page.

If you’re looking to Sell Ideal SignalTek-FO Multimedia Qualification Tester

Product Overview:
The SIGNALTEK-FO is the first and only tester to qualify both copper and fiber-optic cabling to IEEE 802.3 standards. All in one unit that’s less than the price of an optical test set.

With its compact design and soft over-molded sides, the SIGNALTEK-FO fits comfortably in your hands. The easy-to-navigate user interface enables multimedia Gigabit qualification with multimode and single mode capability. You can also perform Bit Error Rate testing and decibel (dB) loss measurements of optical links. Plus, storing and printing qualification reports for copper and fiber jobs are simple using internal memory or USB thumb drives.
SIGNALTEK-FO Capabilities beyond the typical Qualifier

SIGNALTEK-FO offers all of the existing capabilities of the standard SIGNALTEK Qualifier such as Gigabit Ethernet Qualification, test storage and reporting, and active link testing and adds the powerful capability of fiber optic Qualification. Traditional power meter/light source kits only measure the attenuation of fiber optic links. As Gigabit Ethernet is becoming the standard for backbone and zone fiber optic cabling, attenuation tests alone may not be enough to guarantee error-free performance.

SIGNALTEK-FO’s Bit Error Rate testing, adds assurance that fiber optic links can actually support high-speed data in accordance with IEEE 802.3ab standards.

Buying, Selling, Trading Ideal SignalTek-FO

Features:
* Multimode and single mode capability
* Available in 850nm and 1300nm wavelength configurations
* Measure cable attenuation with a dynamic range of up to 20dB
* Guarantee link operation at 1Gbps within IEEE error tolerances

In addition to cable performance qualification, SIGNALTEK can be configured to run for several minutes or hours at a time. While stress testing critical network links, SIGNALTEK transmits hundreds of Gigabits of information across the network while looking for dropped packets. This monitoring mode allows SIGNALTEK to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation of Gigabit Ethernet technology, IDEAL’s innovation brings the best performance to this new class of affordable testers.

Specifications:

Ports/Connections
* USB A/B, DC power input
* Shielded RJ-45 Port :Supports 10/100/1000Mbps Ethernet connections
* Small Form-factor Pluggable (SFP): Supports SFP modules sourced through IDEAL Industries in 850nm and 1300nm wavelengths, 1000Mbps Ethernet

Length Measurement
* RJ-45 Port: TDR length measurement of 1-4 pair cables to 140m/460ft
* SFP Port: No length measurement of fiber optic cables

Bert Error Rate Measurements
* Copper: 10/100/1000Mbps. Error rates tested to IEEE 802.3ab standard
* Fiber: 1000Mbps. Error rates tested to IEEE 802.3ab standard.

Battery Life
* Copper Testing: Approx 15 hours @ 22 tests per hour (45s Autotest)
* Fiber Testing: Recommend use of AC adapters when testing fiber

Included:
* SIGNALTEK Fiber Ready Near-End
* Remote-End Handset
* Carrying Case
* Copper Cable Accessory Kit with Interfaces to RJ45, RJ11, Coax F-Type Cables, and Alligator Clips
* Fiber Optic Cable Accessory Kit:
> 2 Duplex LC-SC 50/125m (2m/7ft) cables
> 2 duplex LC-SC 62.5/125m (2m/7ft) cables
> 1 duplex SC-SC adapter
* 2 AC Power Adapters with International Plugs
* USB Interface Cable
* User Manual on CD-ROM
* Training DVD

If you’re selling your Ideal SignalTek-FO please fill out form on the right hand side of page.

If you’re looking to Sell Ideal LANTEK 2 MM Fiber Cat6a LAN Cable Certfier

Features:

• Best price/performance options – models ranging from 350 MHz to 1000 MHz for Category 6/ISO E through Category 7A/ISO FA certification
• High speed testing saves time and money
• Most internal memory available – store over 1700 Category 6/ISO E tests with graphs
• Patented testing method – eliminate expensive permanent link adapters and test with patch cords for most installation
• Extraordinary fast fiber testing with FiberTEK® FDX – the first dual wavelength, bidirectional fiber certification tool
• Large, ultra-bright display – 4.3 in. wide screen display with white LED backlighting provides easy viewing of high-frequency data plots
• 350 MHz & 500 MHz models are fully upgradable to 1000 MHz
• Smart lithium-ion battery technology – 18 hour battery life with self calibrating “fuel gauge” for accurate capacity readings

LanTEK II offers the best speed, performance and price available today. Nine second Cat 5E and 14 second Cat 6 tests with full performance data plus 10 Gigabit Alien Crosstalk testing that’s more than 4x faster than other systems making LanTEK II the ultimate copper certification platform. The patented universal adapter system lets you certify most cabling with off-the-shelf patch cords saving time and money by eliminating the need for proprietary permanent link adapters.

The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fiber certification available. That’s more than 3x faster than existing testers. Three models provide the needed performance without the added expense; choose from 350 MHz/Cat 6, 500 MHz/Cat 6A or 1000 MHz/Cat7A all with accuracy independently verified by ETL.

LanTEK II also offers ultimate versatility with options for certification of TERA, GG45 and EC7 category 7/7A systems, plus M12 industrial Ethernet and coaxial test adapters.

Universal Link Testing
The patented testing process eliminates the need for costly permanent link adapters. By using universal test adapters for Category 5E through 6A certification, patch cords are typically the only item that needs to be replaced when worn or damaged. This eliminates the wait and expense of proprietary adapters meaning more time is spent testing and less time searching for replacement parts.

Channel and Permanent Link Testing with One Adapter
Only LanTEK allows permanent link and channel certification without changing adapters. The patented DualMODE™ function allows cabling to be certified to two different standards with one press of the Autotest button; half the time it would take with any other certifier.

Certify cabling to both Category 6 permanent link and Category 6 channel link standards at the same time, satisfying requirements from cabling manufacturers and end users without costing any more time in the field. Or certify cabling to existing current standards and proposed future standards which eliminates retesting at a later date.

Fast Test Times
Category 5E certification in 11 seconds, Category 6 in 14 seconds, and Category 6A in only 16 seconds with graphs! Plus enjoy fiber certification that’s 3x faster and 10 gigabit alien crosstalk certification that’s 4x faster than the competition.

Most Memory Capacity
LanTEK II has 7x the storage capacity as competitive certifiers. Save an astonishing 1700 Category 6 results with graphs. If the memory fills, simply off-load the data to a USB flash drive for portability and archiving.

Buying, Selling, Trading Ideal LANTEK 2

Cut the Power Cord
The new smart lithium battery technology provides an amazing 18 hours of use in the field. The revolutionary battery technology has two charging modes that offer the best flexibility available. Slow charge the battery overnight while it is inside the LanTEK II, or remove the battery and plug in to its dedicated charging port for a quick five hour charge. Plus, the battery’s internal fuel gauge automatically selfadjusts every time the pack is completely discharged and recharged, providing accurate charge readings over the life of the battery pack.

Three Models to Suit Any Need
LanTEK II is offered in three models: 350, 500 and 1000. The LanTEK II-350 offers 350MHz of frequency sweep to certify Category 6 cabling and below. LanTEK II-500 sweeps to 500MHz, and is the only certifier designed specifically for Category 6A cabling. LanTEK II-1000 is the world’s fastest certifier with a full 1GHz of certification bandwidth to go well beyond Category 7/ISO Class F (600MHz), all the way to ISO Class FA (1000MHz) standard to support shared sheath applications such as CATV, Ethernet and voice in the same cable.

Maximum Reporting Power
The new IDEAL DataCENTER (IDC) software puts the power in the fingertips of the user. The main test grid display can be customized to display and sort by virtually any test parameter allowing for quick identification of tests that are below desired performance margins. Quickly scan through plot data by choosing a plot type and scrolling through the test list to instantly refresh the plot for each test. This makes visually scanning through reports and searching for anomalies a breeze. IDC offers many reporting options such as detailed, brief, and single line reports, plus export data in XML, CSV and PDF formats. Plus the unique ability to customized the plots by inverting the scales, toggling linear or log frequencies and even adjusting colors makes IDC the most user friendly and powerful cable reporting software ever.

FiberTEK FDX Multimode (850/1300nm)  with LED Light sources for standard fiber

Time Saving Fiber Certification

The FiberTEK FDX option allows users to add full Tier 1, standards compliant fiber certification capability to the LanTEK II certifier. Tier 1 certification utilizes a light source and power meter to measure the power loss of optical cabling. FiberTEK FDX modules incorporate dual light sources and a wide range power meter to allow testing loss of fiber links as well as to measure the light emitted from active network equipment for troubleshooting.

The full-duplex FiberTEK FDX represents the pinnacle of fiber optic certification, saving time and simplifying documentation by completely eliminating the need to swap launch cords or swap modules. The unique fullduplex operation tests a single strand of fiber at two wavelengths and in both directions, plus measures the length with one press of the Autotest button. This means that for each fiber, five test parameters are saved for each cable ID making it the easiest to use fiber certifier ever.

Simplified Testing

Unlike other fiber certification add-ons that require up to four separate testing steps to test each fiber at both wavelengths and in both directions, FiberTEK FDX can accomplish this task in one easy step. FiberTEK FDX revolutionizes the whole fiber certification process by utilizing a sophisticated full duplex optical module that lets each fiber be certified in one simple step with no reversing of patch cords or swapping of optical modules. Four attenuation measurements plus length in one press of the Autotest button. The simplest way to certify fiber.

If you’re selling your Ideal LANTEK 2 please fill out form on the right hand side of page.