If you’re looking to Sell OMNI Scanner LT  Fluke Networks SM & MM Set

Powerful cable certification
solution for every budget The OMNIScanner® LT meets your technology needs and your budget requirements for testing, certifying and documenting copper and fiber networks. That’s because the LT version has the same digital technology as the OMNIScanner2, but without some of the “extras,” making it the most affordable solution you can find.

The OMNIScanner LT provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz delivering unprecedented Level III accuracy. Its superior diagnostics precisely pinpoint faults, while identifying specific connection failures, saving you hours of wasted troubleshooting time. You can test cable compliance with the current TIA/ISO/IEC cabling standards and add powerful adapters like the OMNI-LIA101S Permanent Link Adapter or OMNIFiber MM or SM Adapters for superior test capability.

The OMNIScanner LT features:

– Certification for Cat5/5e/6 cabling links
– Support up to 300MHz bandwidth for testing Category 6/Class E links
– S-Bands diagnostics for precise fault location
– Intuitive graphical interface for maximum technician productivity
– Pre-installed manufacturer-specific cable libraries
– Compliance with TIA/ISO/IEC cabling standards
– The ability to easily manage and document copper and fiber links with new LinkWare™ Software

From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Speed your testing cycle
From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Easy set-up
The vendor-specific cable libraries in OMNIScanner LT make setting up and executing your test operations easy. Regardless of the type of cable you are certifying, OMNIScanner LT speeds through the required test with ease.

Digital test technology
Built on a digital platform, the OMNIScanner LT ensures compliance with new standards as they are approved. So when you purchase an OMNIScanner LT, you know that your investment is future-ready. The OMNIScanner LT processes the measurement results with Digital Signal Processing technology. This measurement method has proven to exceed all other methods for accuracy and repeatability. What does this mean for you? You’ll get the same answer every time. The OMNIScanner LT rivals the accuracy of laboratory test equipment.

Pinpoint accuracy
You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner LT – five times more precise than the Level III standards. Fluke Networks’ patent pending S-Bands™ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.

Fiber is a snap
Transforms the OMNIScanner LT into a powerful fiber optic tool for testing and certifying multimode and singlemode premise fiber networks. The one-button Autotest and simultaneous dual-wavelength measurement of two fibers is the most productive and reliable method for testing fiber links. Choose from two adapters: the LED-based OMNIFiber MM adapter is perfect for multimode fiber networks, while the laser-based OMNIFiber SM adapter certifies singlemode fiber.

Buying, Selling, Trading OMNI Scanner LT
– Fluke Networks OMNIScanner LT MainIncludes:

– Fluke Networks OMNIScanner LT Remote
– Fluke Networks OMNIFiber Multimode 850nm/1300nm Module Set
– Microtest OMNIFiber Singlemode 1310nm/1550nm Module Set
– (2) Fluke Networks OMNIScanner Universal Permanent Link Adapters
– Fluke P/N: 2950-4015-02 Set Reference Adapter
– Fiber Cables:
– – (2) MM ST-ST
– – (2) SM ST-SC
– SC-SC Fiber Connector
– Fluke Linkware Cable Management Software
– (2) Battery Packs
– (2) AC Adapters/Chargers
– (2) Power Cords
– Set of PM06s
– RS-232 PC Interface Cable
– User Manual On CD-ROM
– Soft Carrying Case

If you’re selling your OMNI Scanner LT please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Scanner LT  Fluke Networks Multimode Set

Powerful cable certification solution for every budget The OMNIScanner® LT meets your technology needs and your budget requirements for testing, certifying and documenting copper and fiber networks. That’s because the LT version has the same digital technology as the OMNIScanner2, but without some of the “extras,” making it the most affordable solution you can find.

The OMNIScanner LT provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz delivering unprecedented Level III accuracy. Its superior diagnostics precisely pinpoint faults, while identifying specific connection failures, saving you hours of wasted troubleshooting time. You can test cable compliance with the current TIA/ISO/IEC cabling standards and add powerful adapters like the OMNI-LIA101S Permanent Link Adapter or OMNIFiber MM or SM Adapters for superior test capability.

The OMNIScanner LT features:

– Certification for Cat5/5e/6 cabling links
– Support up to 300MHz bandwidth for testing Category 6/Class E links
– S-Bands diagnostics for precise fault location
– Intuitive graphical interface for maximum technician productivity
– Pre-installed manufacturer-specific cable libraries
– Compliance with TIA/ISO/IEC cabling standards
– The ability to easily manage and document copper and fiber links with new LinkWare™ Software

From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Speed your testing cycle From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Easy set-up The vendor-specific cable libraries in OMNIScanner LT make setting up and executing your test operations easy. Regardless of the type of cable you are certifying, OMNIScanner LT speeds through the required test with ease.

Digital test technology Built on a digital platform, the OMNIScanner LT ensures compliance with new standards as they are approved. So when you purchase an OMNIScanner LT, you know that your investment is future-ready. The OMNIScanner LT processes the measurement results with Digital Signal Processing technology. This measurement method has proven to exceed all other methods for accuracy and repeatability. What does this mean for you? You’ll get the same answer every time. The OMNIScanner LT rivals the accuracy of laboratory test equipment.

Pinpoint accuracy You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner LT – five times more precise than the Level III standards. Fluke Networks’ patent pending S-Bands™ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.

Fiber is a snap Transforms the OMNIScanner LT into a powerful fiber optic tool for testing and certifying multimode and singlemode premise fiber networks. The one-button Autotest and simultaneous dual-wavelength measurement of two fibers is the most productive and reliable method for testing fiber links. Choose from two adapters: the LED-based OMNIFiber MM adapter is perfect for multimode fiber networks, while the laser-based OMNIFiber SM adapter certifies singlemode fiber.

Buying, Selling, Trading OMNI Scanner LT
– Fluke Networks OMNIScanner LT MainIncludes:

– Fluke Networks OMNIScanner LT Remote
– Fluke Networks OMNIFiber Multimode 850nm/1300nm Module Set
– (2) Fluke Networks OMNIScanner Universal Permanent Link Adapters
– Fluke P/N: 2950-4015-02 Set Reference Adapter
– (2) MM ST-ST Fiber Cables
– Fluke Linkware Cable Management Software
– (2) Battery Packs
– (2) AC Adapters/Chargers
– (2) Power Cords
– Set of PM06s
– RS-232 PC Interface Cable
– User Manual On CD-ROM
– Soft Carrying Case

If you’re selling your OMNI Scanner LT please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Scanner LT Fluke Networks Set

Powerful cable certification solution for every budget The OMNIScanner® LT meets your technology needs and your budget requirements for testing, certifying and documenting copper and fiber networks. That€™s because the LT version has the same digital technology as the OMNIScanner2, but without some of the €œextras,€ making it the most affordable solution you can find.

The OMNIScanner LT provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz delivering unprecedented Level III accuracy. Its superior diagnostics precisely pinpoint faults, while identifying specific connection failures, saving you hours of wasted troubleshooting time. You can test cable compliance with the current TIA/ISO/IEC cabling standards and add powerful adapters like the OMNI-LIA101S Permanent Link Adapter or OMNIFiber MM or SM Adapters for superior test capability.

The OMNIScanner LT features:

– Certification for Cat5/5e/6 cabling links
– Support up to 300MHz bandwidth for testing Category 6/Class E links
– S-Bands diagnostics for precise fault location
– Intuitive graphical interface for maximum technician productivity
– Pre-installed manufacturer-specific cable libraries
– Compliance with TIA/ISO/IEC cabling standards
– The ability to easily manage and document copper and fiber links with new LinkWare„¢ Software

From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Speed your testing cycle From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.

Easy set-up The vendor-specific cable libraries in OMNIScanner LT make setting up and executing your test operations easy. Regardless of the type of cable you are certifying, OMNIScanner LT speeds through the required test with ease.

Digital test technology Built on a digital platform, the OMNIScanner LT ensures compliance with new standards as they are approved. So when you purchase an OMNIScanner LT, you know that your investment is future-ready. The OMNIScanner LT processes the measurement results with Digital Signal Processing technology. This measurement method has proven to exceed all other methods for accuracy and repeatability. What does this mean for you? You€™ll get the same answer every time. The OMNIScanner LT rivals the accuracy of laboratory test equipment.

Pinpoint accuracy You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner LT – five times more precise than the Level III standards. Fluke Networks€™ patent pending S-Bands„¢ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.

Buying, Selling, Trading OMNI Scanner LT

Fiber is a snap Transforms the OMNIScanner LT into a powerful fiber optic tool for testing and certifying multimode and singlemode premise fiber networks. The one-button Autotest and simultaneous dual-wavelength measurement of two fibers is the most productive and reliable method for testing fiber links. Choose from two adapters: the LED-based OMNIFiber MM adapter is perfect for multimode fiber networks, while the laser-based OMNIFiber SM adapter certifies singlemode fiber.
– Fluke Networks OMNIScanner LT MainIncludes:

– Fluke Networks OMNIScanner LT Remote
– (2) Fluke Networks OMNIScanner Universal Permanent Link Adapters
– Fluke P/N: 2950-4015-02 Set Reference Adapter
– Fluke Linkware Cable Management Software
– (2) Battery Packs
– (2) AC Adapters/Chargers
– (2) Power Cords
– Set of PM06s
– RS-232 PC Interface Cable
– User Manual On CD-ROM
– Soft Carrying Case

If you’re selling your OMNI Scanner LT please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Scanner Remote Unit

The OMNIScanner provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. You can rely on the OMNIScanner to help you win any Fiber Optic Cat 6/5e/5 bids.

OMNISCANNER is the most advanced hand-held certification and diagnostic tool for the verification of copper links. The Category 7, 6, 5E (Enhanced), 5 and ISO Class F, E, D, and C tester has an extended frequency range of 300 MHz. OMNISCANNER provides full software compliance with TIA and ISO/IEC requirements for measurement reporting and analysis (including Length, Delay, ACR, NEXT, ELFEXT, Return Loss, Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In addition, OMNISCANNER measures Length, Delay, Impedance, and Resistance on coaxial cabling.

Buying, Selling, Trading OMNI Scanner

Includes:

• OMNIScanner Remote Unit
• AC Power Adapter

If you’re selling your OMNI Scanner please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Scanner OMNIFiber Cat6 SM MM

The OMNIScanner provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. You can rely on the OMNIScanner to help you win any Fiber Optic Cat 6/5e/5 bids.

OMNISCANNER is the most advanced hand-held certification and diagnostic tool for the verification of copper links. The Category 7, 6, 5E (Enhanced), 5 and ISO Class F, E, D, and C tester has an extended frequency range of 300 MHz. OMNISCANNER provides full software compliance with TIA and ISO/IEC requirements for measurement reporting and analysis (including Length, Delay, ACR, NEXT, ELFEXT, Return Loss, Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In addition, OMNISCANNER measures Length, Delay, Impedance, and Resistance on coaxial cabling.

OMNISCANNER’s graphical user interface consists of a backlit LCD display, quick access menus, arrow keys, and descriptive menu options that guide you through certifying or troubleshooting cabling systems. For test and certification of twisted pair cabling, the OMNISCANNER requires the OMNIREMOTE unit at the opposite end of the cabling link under test. OMNISCANNER communicates with OMNIREMOTE to obtain status and perform measurements from both ends of the link.

Features:

• Instantly pinpoint specific connection failures with S-Bands diagnostics
• Test up to 300 MHz on class F links
• Dual-fiber, dual wavelength, Multimode & Single Mode certification with OMNIFiber Adapters
• Manufacturer-specific cable libraries pre-installed
• Easily manage and document copper and fiber links with new LinkWare software

Certify multimode and singlemode fiber with Fluke Networks OMNIFiber Adapters.

All of Fluke Networks OMNIFiber Adapters:

• Test two fibers at two wavelengths in a single automated operation.
• Measure fibe r length, propagation delay and optical loss.
• Provide clear PASS or FAIL indication with automated results analysis.
• Enable bi-directional testing without swapping main and remote units.
• Feature standards and fiber cable libraries for easy set-up.
• Incorporate interchangeable connector adapters for simple network connection.
• Communicate with LinkWare™ Cable Test Man agement Software.
• Quickly snap onto any OMNIScanner® series cable analyzer.
• Are ruggedly built for demanding field use.
• Test multimode fiber at 850 nm and 1300 nm with the LED-base d OMNIFiber® MM.
• Test singlemode fiber at 1310 nm and 1550 nm with the laser-based OMNIFiber® SM.

Buying, Selling, Trading OMNI Scanner

The right adapter for the job
Your network may contain different fiber types: multimode or singlemode. The way to
accurately test and certify your network is with an adapter designed for the job. Fluke
Networks offers two OMNIFiber adapters. Use the OMNIFiber MM adapter for multimode fiber. Its LED sources ensure accurate, standards-compliant results when testing multimode fiber. Use the OMNIFiber SM adapter for singlemode fiber. Its laser sources ensure accurate, standards-compliant results when testing singlemode fiber.

Fast and easy testing
Using an OMNIFiber adapter, OMNIScanner provides a one-button •Autotest• that measures fiber length and op tical loss on two fibers at two wavelengths in a single automated operation. The scanner then compares the results to the industry standard you select and instantly provides a clear PASS or FAIL i ndication. Test more fibers in less time with OMNIFiber.
OMNIFiber adapters connect easily to the network. Interchangeable connector adapters permit simple network connection and straightforward reference power measurement. Interchangeable connector adapters are available in the most popular connector styles.

Reporting made simple
LinkWare™ Software makes it easy to manage and print the rich test data, to ensure the quality of the installation and performance. Instantly access and organize your results and create professional reports that meet new certification de mands, impress your customers and give yourself a competitive edge. Merge results for the entire network with the OptiFiber Certifying OTDR or the DSP Series cable tester.

If you’re selling your OMNI Scanner please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Scanner OMNIFiber 850 1300 MM

The OMNIScanner provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. You can rely on the OMNIScanner to help you win any Fiber Optic Cat 6/5e/5 bids.

OMNISCANNER is the most advanced hand-held certification and diagnostic tool for the verification of copper links. The Category 7, 6, 5E (Enhanced), 5 and ISO Class F, E, D, and C tester has an extended frequency range of 300 MHz. OMNISCANNER provides full software compliance with TIA and ISO/IEC requirements for measurement reporting and analysis (including Length, Delay, ACR, NEXT, ELFEXT, Return Loss, Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In addition, OMNISCANNER measures Length, Delay, Impedance, and Resistance on coaxial cabling.

OMNISCANNER’s graphical user interface consists of a backlit LCD display, quick access menus, arrow keys, and descriptive menu options that guide you through certifying or troubleshooting cabling systems. For test and certification of twisted pair cabling, the OMNISCANNER requires the OMNIREMOTE unit at the opposite end of the cabling link under test. OMNISCANNER communicates with OMNIREMOTE to obtain status and perform measurements from both ends of the link.

Buying, Selling, Trading OMNI Scanner

Features:

• Instantly pinpoint specific connection failures with S-Bands diagnostics
• Test up to 300 MHz on class F links
• Dual-fiber, dual wavelength, Multimode & Single Mode certification with OMNIFiber Adapters
• Manufacturer-specific cable libraries pre-installed
• Easily manage and document copper and fiber links with new LinkWare software

OMNIFiber Multimode Adapter Set

OMNIFiber is the first fiber adapter capable of supporting measurements for both single-and multimode fiber. OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link. With single mode fiber, OMNIScanner measures loss on transmit and receive fibers at 1310 nm.

• Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters
• Easily manage and document copper and fiber links with LinkWare software

If you’re selling your OMNI Scanner please fill out form on the right hand side of page.

If you’re looking to Sell OMNI Scanner Cat5 Cat5e Cat6 Tester

The OMNIScanner provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz using an extendible digital platform that ensures unprecedented Level III accuracy. You can rely on the OMNIScanner to help you win any Fiber Optic Cat 6/5e/5 bids.

OMNISCANNER is the most advanced hand-held certification and diagnostic tool for the verification of copper links. The Category 7, 6, 5E (Enhanced), 5 and ISO Class F, E, D, and C tester has an extended frequency range of 300 MHz. OMNISCANNER provides full software compliance with TIA and ISO/IEC requirements for measurement reporting and analysis (including Length, Delay, ACR, NEXT, ELFEXT, Return Loss, Resistance, PSNEXT, PSACR, PSELFEXT and Attenuation). In addition, OMNISCANNER measures Length, Delay, Impedance, and Resistance on coaxial cabling.

OMNISCANNER’s graphical user interface consists of a backlit LCD display, quick access menus, arrow keys, and descriptive menu options that guide you through certifying or troubleshooting cabling systems. For test and certification of twisted pair cabling, the OMNISCANNER requires the OMNIREMOTE unit at the opposite end of the cabling link under test. OMNISCANNER communicates with OMNIREMOTE to obtain status and perform measurements from both ends of the link.

Buying, Selling, Trading OMNI Scanner

Features:

• Instantly pinpoint specific connection failures with S-Bands diagnostics
• Test up to 300 MHz on class F links
• Dual-fiber, dual wavelength, Multimode & Single Mode certification with OMNIFiber Adapters
• Manufacturer-specific cable libraries pre-installed
• Easily manage and document copper and fiber links with new LinkWare software

If you’re selling your Fluke OMNI Scanner please fill out form on the right hand side of page.

If you’re looking to Sell Fluke DTX-PM11B Link Personality Module Set

Fluke Networks DSP-PM11B IDC Permanent Link Personality Module
Personality Modules is the cabling industry’s first centered, shielded test plug. With global industry approval by connectivity vendors, this unique “center plug” certifies link as well as connecting hardware compliance to the Cat 6 standard to achieve an “open” cabling system. Supports all UTP, FTP and ScTP cabling systems.

Buying, Selling, Trading Fluke DTX-PM11B

Features:

• It is critical that you know the wiring code of the installation you wish to test. Unlike RJ45 test leads, IDC modules are color code specific.
• Centered TIA/ISO plug
• Shielded – one global solution
• Vendor independent
• Snag-free clip

If you’re selling your Fluke DTX-PM11B please fill out form on the right hand side of page.

If you’re looking to Sell Fluke DTX-CHA003 Coax Adapter

Fluke Networks DTX-CHA003

With the DTX Coax Test Adapters, the DTX-1800 measures the insertion loss of the coaxial cable over the frequency range from 1 through 900 MHzx. The DTX-1200 measures insertion loss over the range from 1 – 350 MHz with the coax adapters.

Buying, Selling, Trading Fluke DTX-CHA003

If you’re selling your Fluke DTX-CHA003 please fill out form on the right hand side of page.