If you’re looking to Sell OMNI Scanner LT Microtest Cat5/5e Cat6 MM Tester
Powerful cable certification
solution for every budget The OMNIScanner® LT meets your technology needs and your budget requirements for testing, certifying and documenting copper and fiber networks. That’s because the LT version has the same digital technology as the OMNIScanner2, but without some of the “extras,” making it the most affordable solution you can find.
The OMNIScanner LT provides advanced certification for Cat 5/5e/6 cabling links to 300 MHz delivering unprecedented Level III accuracy. Its superior diagnostics precisely pinpoint faults, while identifying specific connection failures, saving you hours of wasted troubleshooting time. You can test cable compliance with the current TIA/ISO/IEC cabling standards and add powerful adapters like the OMNI-LIA101S Permanent Link Adapter or OMNIFiber MM or SM Adapters for superior test capability.
The OMNIScanner LT features:
Certification for Cat5/5e/6 cabling links
Support up to 300MHz bandwidth for testing Category 6/Class E links
S-Bands diagnostics for precise fault location
Intuitive graphical interface for maximum technician productivity
Pre-installed manufacturer-specific cable libraries
Compliance with TIA/ISO/IEC cabling standards
The ability to easily manage and document copper and fiber links with new LinkWare™ Software
From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.
Speed your testing cycle
From beginning to end of the network testing process, OMNIScanner LT accelerates your work, simplifies your tasks and delivers higher productivity to your bottom line.
Easy set-up
The vendor-specific cable libraries in OMNIScanner LT make setting up and executing your test operations easy. Regardless of the type of cable you are certifying, OMNIScanner LT speeds through the required test with ease.
Digital test technology
Built on a digital platform, the OMNIScanner LT ensures compliance with new standards as they are approved. So when you purchase an OMNIScanner LT, you know that your investment is future-ready. The OMNIScanner LT processes the measurement results with Digital Signal Processing technology. This measurement method has proven to exceed all other methods for accuracy and repeatability. What does this mean for you? You’ll get the same answer every time. The OMNIScanner LT rivals the accuracy of laboratory test equipment.
Pinpoint accuracy
You, your customer and your cable manufacturer will all be reassured by the laboratory standard accuracy of the OMNIScanner LT – five times more precise than the Level III standards. Fluke Networks’ patent pending S-Bands™ diagnostics can save hours of confusion about network problems by instantly identifying (or eliminating) specific connection failures.
Fiber is a snap
Transforms the OMNIScanner LT into a powerful fiber optic tool for testing and certifying multimode and singlemode premise fiber networks. The one-button Autotest and simultaneous dual-wavelength measurement of two fibers is the most productive and reliable method for testing fiber links. Choose from two adapters: the LED-based OMNIFiber MM adapter is perfect for multimode fiber networks, while the laser-based OMNIFiber SM adapter certifies singlemode fiber.
General Specifications
Temperature range, operating 0° to +40° C
Temperature range, storage -10° to +60° C
Humidity range, operating 0 to 75% RH, non-condensing
Humidity range, storage 0 to 95% RH, non-condensing
Certifications CE, CSA
Dimensions 9.00 x 9.85 x 3.94 cm (3.5 x 3.9 x 1.6 in)
Weight 0.11 kg (0.24 lb)
Optical transmitter
Connector ST
Emitter type OMNIFiber MM: LED; OMNIFiber SM: Fabry-Perot (FP) laser
Emitter wavelengths OMNIFiber MM: 850 and 1300 nm; OMNIFiber SM: 1310 and 1550 nm
Power output (minimum) OMNIFiber MM: -19 dBm; OMNIFiber SM: -11 dBm
Power output stability (8 hours) +/- 0.25 dB at 23 C
Optical receiver
Power measurement accuracy +/- 0.25 dB at 23 C, 45% to 75% RH, -20 dBm for 850/1300/1310 nm, -10 dBm for 1550 nm
Connector Interchangeable Connector Adapters: ST, SC, FC, universal
Detector type InGaAs
Calibrated wavelengths 850 nm, 1300 nm, 1310 nm, 1550 nm
Power measurement range + 3 to –55 dBm
Power measurement linearity +/- 0.25 dB at 23 C
Length measurement OMNIFiber MM: 2000 m; OMNIFiber SM: 16000 m
Length measurement resolution OMNIFiber MM: 1 m (1 ft); OMNIFiber SM: 1 m from 0 – 2000 m OMNIFiber SM: 2 m from 2001 – 16000 m
Buying, Selling, Trading OMNI Scanner LT
OMNIFiber MM Modules
OMNIFiber snaps onto the top of OMNIScanner 2, Omniscanner 1 & Omnscanner LT copper cable tester to transform it into a Multi-mode fiber certification tool. Using the OMNIFiber adapter, OMNIScanner provides a one-button “Autotest” that measures multimode length, loss and propagation delay on both transmit and receive fibers at 850 and 1300 nm simultaneously. It then compares the results to the appropriate industry standard and provides a simple PASS/FAIL indication of the tested link.
- Dual-fiber, dual wavelength, multimode certification with OMNIFiber Adapters
- Easily manage and document copper and fiber links with LinkWare software
Test Functions:
- Multimode Fiber: Length, Propagation Delay, Loss (850nm & 1300nm)
If you’re selling your OMNI Scanner LT please fill out form on the right hand side of page.